You have been tasked with testing a CAT5e cable

HOTSPOT

You have been tasked with testing a CAT5e cable.

A summary of the test results can be found on the screen.

Instructions

Step 1: Select the tool that was used to create the cable test results.

Step 2: Interpret the test results and select the option that explains the results. After you are done with your analysis, click the ‘Submit Cable Test Analysis’ button.

Step 3: You have determined that the original crimp is faulty. Re-crimp the cable connector using the T568B cabling standard. Choose the correct cable for each pin in the connector by clicking on the pin and selecting a cable color.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

View Answer

Answer:

Explanation:

A Cable Certifier provides “Pass” or “Fail” information in accordance with industry

standards but can also show detailed information when a “Fail” occurs. This includes shorts, the wire pairs involved and the distance to the short. When a short is identified, at the full length of the cable it means the cable has not been crimped correctly.