You are on the phone working with a colleague that is console connected to a lightweight AP that has lost its configuration.
Which three actions are necessary to allow the AP to connect to a controller? (Choose three.)
A . Configure the AP IP address.
B . Configure the controller name.
C . Configure the controller IP address.
D . Configure the AP hostname.
E . Configure the AP IP default-gateway.
F . Configure the AP username and password.
Answer: ACE
Explanation:
In order to manually configure static information on a LAP using the AP CLI interface, you can use these EXEC mode CLI commands:
AP#capwap ap ip address <IP address> <subnet mask>
AP#capwap ap ip default-gateway <IP-address>
AP#capwap ap controller ip address <IP-address>
AP#capwap ap hostname <name>
(optional)
Notice the first 3 are needed for the AP to connect to the controller; the last step is optional and not needed for basic connectivity to the controller.
http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/99763-reset-lwappconfig-lap.html