Which four parameters must be configured for local EAP-FAST on the controller? (Choose four.)

Which four parameters must be configured for local EAP-FAST on the controller? (Choose four.)
A . authority ID
B . authority ID Information
C . client key
D . PAC
E . server key
F . TTL for PAC
G . monitor key
H . NTP source

View Answer

Answer: ABEF

Explanation:

EAP-FAST is designed to speed re-authentication when a station roams from one AP to another. Here are the parameters that can be configured:

Server Key (in hexadecimal): The key (in hexadecimal characters) used to encrypt and decrypt PACs.

Time to Live for the PAC: Enter the number of days for the PAC to remain viable. The valid range is 1 to 1000 days, and the default setting is 10 days. Authority ID (in hexadecimal): Enter the authority identifier of the local EAP-FAST server in hexadecimal characters. It is possible to enter up to 32 hexadecimal characters, but an even number of characters must be entered. This will identify the controller as the emitter of the PAC.

Authority ID Information: Enter the authority identifier of the local EAP-FAST server in text format. Anonymous Provision: Enable this setting to allow anonymous provisioning. This feature allows PACs to be sent automatically to clients that do not have one during PAC provisioning. If this feature is disabled, PACS must be manually provisioned. Disable this feature when using EAP-FAST with certificates. The

default setting is enabled.