Instructions:
– THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION
– To access the multiple-choice questions, click on the numbered box on the left of the top panel.
– There is one multiple-choice question with this task. Be sure to answer the question before selecting the Next button
Scenario:
You have just finished configuring a WLC2504 through the console CLI. The WLC is attached to an existing production network switch.
However, you are not able to reach the WLC via https://10.10.10.10.
Which change can correct inband access to the WLC?
A . change the switch FastEthernetO/1 duplex setting
B . change the switch FastEthernetO/1 speed setting
C . enable the switch FastEthernetO/1 spanning-tree port-fast trunk
D . change the switch FastEthernetO/1 trunk encapsulation
E . change the WLC management interface to use DHCP
F . change the WLC management interface VLAN
G . change the WLC configuration of NTP
H . browse to WLC via http://10.10.10.10
Answer: D
Explanation:
All of the other ports in the network are using the default VLAN (VLAN 1) but port 0/1, which connects to the WLC, is configured as a trunk, so VLAN 1 is not operational.
