What is the solution of the fault condition?

What is the solution of the fault condition?
A . Under the interface Serial0/0/0 configuration enter the ip nat inside command
B . Under the interface Serial0/0/1 configuration enter the ip nat outside command
C . Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D . Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command

View Answer

Answer: C

Explanation:

Clients 1 and 2 belong in the 10.2.0.0 subnet, as if you observe the NAT configuration you will notice that only 10.1.0.0 are specified in the NAT pool. Clients 1 and 2 are not being translated when they should be. The problem is with the NAT configuration on R1. Adding the "permit 10.2.0.0" statement to the NAT pool access list will include these two hosts to be translated, and then they should be able to ping the web servers.