You have a Fibre Channel switch with one of its ports connected to a host. The host remains in the initializing state.
What could cause this issue?
A . The FLOGI packet was dropped somewhere on the data path.
B . The host it not powered on.
C . The ELP process failed after the FLOGI occurred.
D . The vFC interface on the host is configured to use an incorrect mode.
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/troubleshooting/guide/N5K_Troubleshooting_Guide/n5K_ts_sans.html