Click the Exhibit button.
— Exhibit —
user@router> show configuration routing-options
autonomous-system 65001;
user@router> show configuration protocols bgp
group 65002 {
traceoptions {
file bgp-trace;
flag open detail;
}
neighbor 192.168.100.2 {
peer-as 65002;
}
}
user@router> show log bgp-trace
Feb 5 20:07:08 trace_on: Tracing to "/var/log/bgp-trace" started
Feb 5 20:08:23.477912 bgp_send. sending 63 bytes to 192.168.100.2 (External AS 65002)
Feb 5 20:08:23.478040
Feb 5 20:08:23.478040 BGP SEND 192.168.100.1+62776 -> 192.168.100.2+179
Feb 5 20:08:23.478077 BGP SEND message type 1 (Open) length 63
Feb 5 20:08:23.478100 BGP SEND version 4 as 65001 holdtime 90 id 10.200.1.4 parmlen 34
Feb 5 20:08:23.478119 BGP SEND MP capability AFI=1, SAFI=1
Feb 5 20:08:23.478138 BGP SEND Refresh capability, code=128
Feb 5 20:08:23.478155 BGP SEND Refresh capability, code=2
Feb 5 20:08:23.478176 BGP SEND Restart capability, code=64, time=120, flags=
Feb 5 20:08:23.478196 BGP SEND Restart capability AFI=1, SAF=1, Flags=ForwardingSaved
Feb 5 20:08:23.478217 BGP SEND 4 Byte AS-Path capability (65), as_num 65001
Feb 5 20:08:23.478820
Feb 5 20:08:23.478820 BGP RECV 192.168.100.2+179 -> 192.168.100.1+62776
Feb 5 20:08:23.478859 BGP RECV message type 1 (Open) length 59
Feb 5 20:08:23.478880 BGP RECV version 4 as 65003 holdtime 90 id 192.168.1.1 parmlen 30
Feb 5 20:08:23.478899 BGP RECV MP capability AFI=1, SAFI=1
Feb 5 20:08:23.478918 BGP RECV Refresh capability, code=128
Feb 5 20:08:23.478935 BGP RECV Refresh capability, code=2
Feb 5 20:08:23.478955 BGP RECV Restart capability, code=64, time=120, flags=
Feb 5 20:08:23.478974 BGP RECV 4 Byte AS-Path capability (65), as_num 65003
Feb 5 20:08:23.479057 bgp_process_open: : NOTIFICATION sent to 192.168.100.2 (External AS 65002): code 2 (Open Message Error) subcode 2 (bad peer AS number), Reason: peer 192.168.100.2 (External AS 65002) claims 65003, 65002 configured
Feb 5 20:08:23.479083 bgp_send. sending 21 bytes to 192.168.100.2 (External AS 65002)
Feb 5 20:08:23.479104
Feb 5 20:08:23.479104 BGP SEND 192.168.100.1+62776 -> 192.168.100.2+179
Feb 5 20:08:23.479136 BGP SEND message type 3 (Notification) length 21
Feb 5 20:08:23.479156 BGP SEND Notification code 2 (Open Message Error) subcode 2 (bad peer AS number)
— Exhibit —
You have been asked to configure an EBGP peering to AS 65002. The EBGP peering is stuck in an Active state.
Referring to the exhibit, what would be changed to bring up the peering?
A . Configure the local-as to 65003.
B . Configure the autonomous-system to 65003.
C . Configure the EBGP peering as passive.
D . Configure the peer-as to 65003.
Answer: D