Real HCIA-Access H35-210 Exam Dumps

After taking and passing the HCIA-Access H35-210 exam, you will have the ability to commission Huawei access network devices and configure basic services, plan ODN networks, and troubleshoot basic faults. We provide the real Huawei Certified ICT Associate-Access H35-210 exam dumps, which are the best guides for you to study the following H35-210 topics: Access Network Overview, Network Communication Principles, xPON & xDSL Principles, PPPoE&DHCP&VLAN Principles, Data service basics& Data Service Configuration, ODN Engineering Implementation and Maintenance & Network Management Basics. Practice Huawei HCIA-Access H35-210 exam free dumps below.

Page 1 of 2

1. Which statement about IP routing statement is true?

Routing is the concept of the second layer in the OSI model.

Any of the routing must include the following three parts information: source address, destination address and next hop.

In the LAN, routing includes the following two parts content: IP address and MAC address.

IP routing is the path information of guiding IP packet forwarding.

2. Which is the next generation development prospect of access network ?

to expand application of PSTN

increase transmission business types on the ADSL

Light into the copper

improve ADSL transmission distance, increase coverage radius

3. Which of the following does not belong to the scope of the communication network?

Telephone Network

Internet Network

Radio and Television Network

National Grid

4. In the access network access technology, which of the following access method can provide maximum access bandwidth?

ADSL

ADSL 2+

VDSL

GPON

5. ICMP is a link layer protocol, ICMP message is triggered by the physical layer, and then respond by IP layer or a higher layer protocol.

True

False

6. Routing in the routing table can not exist mask of 0.0.0.0 routing entry.

True

False

7. In the routing table item, for the same destination address and mask, only corresponding to a unique nexthop and outbound interface.

True

False

8. MAC address is composed of 48 bit, usually showed in 12 hexadecimal, the first six hexadecimal digits by the IEEE in charge of unified distribution, used to determine the uniqueness of the manufacturers, the last six hexadecimal digits by the manufacturers responsible for their own management.

True

False

9. TTL is mainly to prevent IP packet loop forwarding in the network, wasting network bandwidth.

True

False

10. Link layer defines the electrical, mechanical process and function, to realize line activation, keeping and demolition on both ends of system connection.

True

False

Page 2 of 2

11. Which layer of the OSI model does the router manly work in ?

Physical Layer

Link Layer

Network layer

Transport Layer

12. Part of the field in the IP packet is dedicated to the description of the life cycle of the message, that is TTL value, how much is its maximum value ?

255

256

1023

1024

13. LAN is generally transmitted in the form of bus-based, the most commonly used protocol is carrier sense and collision detection CSMA/CD protocol.

True

False

14. Ethernet technology is a widely used technology, according to the different transmission rate, there are three classes of 10M, 100M, 1000M, including 10M and 100M Ethernet transmission medium is commonly used for twisted pair, but due to high speed of 1000M Ethernet ,the transmission medium must use optical fiber.

True

False

15. LAN computers in judging the received broadcast frame is the method whether they should receive, judge whether the source MAC address of the frame is the same as the hardware address of the machine.

True

False

16. MAC address is usually purchased by each manufacturer from IEEE, but can also be specified on their own.

True

False

17. MAC address of computer network card is unified assigned to each manufacturer by IETF, globally unique.

True

False

18. Fast Ethernet standard rate has 100Base-TX, 100Base-T4 and 100Base-FX.

True

False

19. In Ethernet, according to what address to distinguish the different devices?

LLC address

MAC address

IP address

IPX address

20. Which layer of the OSI reference model does Ethernet switches work in ?

Physical Layer

Data link layer

Network layer

Transport Layer