HPE0-V14 HPE ATP Free Practice Test

1. You are installing a HPE MSA storage system and need to connect the power cooling module (PCM).

What should you do to ensure power redundancy?

2. A customer needs to replace an existing storage array.

The new array must be suitable for remote office deployment and support the following:

✑ Multi-protocol connectivity

✑ Flash-accelerated storage

✑ Low-cost midline SAS drives

Which HPE storage platform will meet these requirements?

3. You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party

networking equipment.

Which HPE management solution meets the customer’s needs?

4. A customer needs to create a large RAID set for archive storage on large-capacity drives.

Which RAID level is recommended for this customer?

5. You are working in a data center with multiple servers and need to update the iLO 5 user names and passwords on a regular basis.

Which tool enables you to streamline and automate this process?

6. You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.

Which tool should you use?

7. You are designing a solution to run a Citrix XenDesktop workload.

Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?

8. A fast-growing customer with a NAS-based storage solution is evaluating Fibre Channel storage for their VMware environment.

How would this customer benefit from adding 16 Gb Fibre Channel storage to their environment? (Choose two.)

9. A customer has an ESXi server in a branch office They need to perform backups locally. The local backups must be replicated to the main data center with built-in deduplication

What should the customer install at the branch office?

10. A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs.

Which troubleshooting steps should you prioritize? (Choose two.)

11. A customer needs Layer 2 switches that provide basic functionality. In the future, this customer might need to use the switches’ CLI to configure VLAN and STP features.

Which category of the switches does meet the customer’s needs?

12. DRAG DROP

Match the HPE Tool with its use case. Select all that apply.

13. You are designing a server solution that requires a significant amount of memory.

Which guideline should you keep in mind when working with memory channels?

14. You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.

How should you install the PDUs to maximize power distribution and space efficiency?

15. A customer has redundant SAN fabrics with a single HPE SN6000B 16 GB 48-port.24 SAN switch in each fabric. They plan to expand their virtualization environment by adding two HPE DL360s and an MSA 2042. Each DL360 will connect to the fabric via dual port 16 Gbps FC HBAs, and the MSA 2042 will connect with four FC Ports. The 24 ports on each switch are currently In use for other applications.

How many additional Port on demand licenses must be customer purchase for each switch if they redundantly connect all the new FC HBA ports to their existing SN600B switches?

16. DRAG DROP

Place the components on the left in the correct order on the right for the recommended power-up sequence.

17. A customer needs a high level of flexibility and the most efficient use of available capacity in their MSA storage system.

How should the MSA be configured?

18. A customer requires a storage platform for their department data. They have a limited budget and will be sharing files among their Microsoft Windows environment.

Which HPE storage platform meets the customer’s needs?

19. A customer needs to connect two switches without VLANs or Spanning Tree.

To which mode should the switches be set?

20. A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures.

Which benefits does a customer gain by configuring Remote Support on their environment? (Choose two.)

21. A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.

Which HPE storage platform meets the customer’s needs?

22. A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.

Which feature of MSA 2042 will help to improve iOP performance?

23. DRAG DROP

Match the storage technology to the storage type.

24. A customer needs to increase the availability and bandwidth of network connectivity to their servers.

Which switch feature meets the customer’s needs?

25. You are configuring an internal Smart Array controller on an HPE ProLiant server.

Which statement is true regarding the drives in the logical array?

26. A customer requires an entry-level, all-flash storage system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.

Which HPE storage system meets the customer’s requirements?

27. You are troubleshooting a HPE ProLiant rack-mount server. You notice that all front-panel status LEDs flash simultaneously.

What does this indicate has occurred on the server?

28. You are installing an HPE ProLiant server that has a shared network port for iLO and NIC teaming. You need to ensure that you can still access iLO after configuring the NIC team.

Which teaming technology should you configure?

29. A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server.

Which HPE tool can the admin use to gather this information?

30. A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.

Which action should the customer take first?

31. A customer needs to update firmware and perform diagnostic tests on various components of a HPE ProLiant server.

Which utility should they use?

32. A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.

Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

33. You need to install 10 HPE ProLiant servers in an environment without DHCP.

Which tool can you use to set up remote management?

34. A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.

Which HPE solution meets this customer’s requirements?

35. Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and servers in an environment?

36. You need to update the firmware on an MSL2024.

Which HPE utility do you need to use?

37. Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

38. A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections. The customer is already over budget and needs to keep costs down.

Which option should you recommend Tor connecting to the switch?

39. A customer requires a recovery strategy that provides multiple rollback points during the day for their Microsoft SQL database. The customer needs to be able to recover data instantly.

Which method meets this requirement?

40. A customer needs to enable HPE Proactive Care and automated case creation for server hardware failures in their OneView environment.

Which step do you need to complete in OneView to accomplish these tasks?

41. A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have expressed an interest in software-defined storage.

Which HPE compute platform should you suggest?

42. DRAG DROP

Match each workload profile description with the corresponding profile. (Select all that apply.)

43. A customer needs a solution that supports rapid provisioning changes on physical bare-metal servers and on a virtualization hypervisor. They are considering migrating to a new solution that supports software-defined storage.

Which HPE compute platform should the customer implement?

44. You are installing a rack at customer site.

How can you ensure redundant power to the rack?

45. When installing servers in a rack, a customer has left gaps between the servers.

What should you tell this customer regarding the space between servers? (Select two.)

46. A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center.

Which HPE resource should you use to provide this information?

47. A customer is enhancing their server and storage virtualization infrastructure. They need to maximize memory density per rack unit and provide an all-flash array to the environment.

Which HPE solutions should they install to fulfill these requirements (Select two.)

48. Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)

49. DRAG DROP

A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.

Identify the correct server and storage to meet the customer requirements.

50. You are installing an HPE ProLiant server in a rack at a customer site. The customer’s facility is in a high-voltage utility service area, and they want to be certain that the power supply is supported.

Which ProLiant feature addresses the customer’s concern?

51. A customer has an existing environment that contains a mixture of network vendors. The customer wants to manage all devices using a single interface.

What should the customer use to manage the devices?

52. A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.

Which management application can the customer use to discover errors quickly and minimize the possible downtime?

53. You are working on a server, and you notice that the blue UID light on the server is flashing slowly.

What does this indicate?

54. You are creating an internal array on an HPE ProLiant server.

What can you do to maximize the storage space efficiency?

55. What has HPE implemented in the HPE ProLiant Gen10 to prevent malware?

56. A customer needs to share files among their Microsoft Windows servers cost-effectively and requires disaster support Which native StoreEasy features win address the customer's need? (select two)

recovery

57. A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.

How should the customer configure their network?

58. Which statement is true regarding configuring memory in an HPE ProLiant server?

59. A customer has reported that while running an application that is streaming live data, they experience fluctuations in processor frequency as they increase the server performance.

Which HPE ProLiant Gen10 system tuning feature would help eliminate this issue?

60. A customer is upgrading their network infrastructure to provide the best performance for IP storage.

Which technologies in a network switch meet the customer’s needs? (Choose three.)

61. A customer requires a high level of network bandwidth and reliability. You are installing a pair of HPE switches that can provide redundancy with multiple connections between them for high availability and faster throughput.

Which technology should you configure on the switches to enable the capability the customer requires?

62. What should you install with a server for a customer who may need to perform maintenance on the server while it is the rack? (Select two.)

63. A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality.

Which HPE product family will meet this customer’s needs?

64. You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array.

What should you explain to this customer?

65. You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.

Which components should you remove? (Choose two.)

66. What can you do when installing an HPE switch to provide protection from electrostatic discharge?

67. You are installing multiple components into an existing server.

Which HPE resource can you use to verify the compatibility of the server hardware options with the server? (Select two.)

68. A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.

Which solutions would HPE recommend to meet the customer needs? (Choose two.)

69. A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.

The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.

Which architecture meets the customer requirements?

70. A client needs a data center network for a highly-virtualized server environment.

They have the following requirements:

• 25 Gb connectivity from the servers to the top-of-rack switches

• support for iSCSl storage

• lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center

• support for Python script interpretation and open APIs

Which networking product line and architecture should you recommend?

71. A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.

Which management solution provides this functionality?

72. What is the process or writing data to two locations within a single array in real time?

73. DRAG DROP

Match each characteristic to the correct storage type.

74. DRAG DROP

A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.

Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

75. A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.

Which storage device would best address their concerns?

76. A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.

Which command can be used in the CLI to perform this operation?

77. A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.

Which HPE tool should you recommend for performing this task?

78. DRAG DROP

Match the speed and protocol with the appropriate component.

79. DRAG DROP

Match the feature to the lowest iLO5 license in which it is available

80. You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs

interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50

Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

81. A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space.

Which HPE product should you recommend to the customer?

82. A customer needs a shared storage solution for a virtualization platform that will host a database application. The customer is considering an HPE Nimble array.

Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

83. Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?

84. Read the question, and then refer to the exhibit.

<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP>

An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.

The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.

What must you do to resolve this issue?

85. A customer is subject to regulatory requirements and their data is highly sensitive.

Which HPE Smart Array feature addresses their need for an level of security for data stored inside their server?

86. DRAG DROP

Indicate whether each management feature manages or monitors a single system or multiple systems.

87. DRAG DROP

Match the stacking technology to the switch series.

88. You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a

VMware ESXi server to support multiple VLANs.





Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?

89. When is it appropriate for a customer to implement HPE OneView Standard?

90. A customer needs to share files cost-effectively among their Microsoft Windows server over a local network.

Which storage solution meets this requirement?

91. When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?

92. A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.

Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

93. DRAG DROP

Match the Networking Product Family to the appropriate use case:

94. What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?

95. A customer has a VMware environment with HPE ProLiant servers and Nimble storage.

They have been using a Windows VM to provide file services for their employees.

The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.

What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

96. What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?

97. A customer has a small business office and is concerned that the local storage in their current ProLiant Gen 10 server with a Linux OS Is reaching maximum capacity

Which solution should you recommend to expand the customers data storage capacity?

98. Refer to the exhibit.





You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.

What should be added to the configuration to ensure availability?

99. In which protocol are REST API requests transported?

100. DRAG DROP

Refer to the exhibit.





A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.

The customer is now experiencing performance issues.

Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

101. A customer wants an HPE solution to expand a Big Data platform. The company is outgrowing its current setup and expects to consume 1 PB of data in a few months and up to 2 PB of data within a year.

Which HPE server platform is best suited for this use case?

102. Refer to the exhibit.





A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.

Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?

103. You need to change BIOS configuration settings without rebooting a server.

Which system utility should you use?

104. Exhibit:





Which HPE ProLiant Server meets the customer's requirements?





Which HPE ProLiant Server meets the customer's requirements?

105. DRAG DROP

Drag the correct protocols from the left to their appropriate area on the topology.

106. You are installing an HPE Nimble HF20 into a customer’s existing rack.

Prior to installation, what should you consider?

107. DRAG DROP

Match each HPE solution to its optimal use case.

108. A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.

Which HPE storage system needs the customer’s requirements?

109. A system administrator’s performing the BIOS/Platform configuration of a DL380 Gen10 server. You notice the amber health LED.

The health status of which solution components can be verified with embedded UEFI Diagnostics? (Choose two.)

110. Which disk technology provides the lowest latency for performing random reads?

111. A customer is purchasing a complete HPE solution that includes servers, storage, and networking. They need to leverage cloud storage for an off-site copy of their data in case of disaster.

Which HPE solutions should you suggest? (Choose two.)

112. A customer is moving a server from a co-location facility back into their existing data center to comply with new internal policies on data management.

Due to budget constraints, the customer cannot purchase any additional switches and will need to use an existing end-of-row design with HPE FlexFabric switches While the server will be installed six racks away from the switches, the total cable run with cable management Is expected to be 35 m.

Which component should be selected when designing the 10 Gbps connectivity option for the server?

113. When should you choose to populate a server with LRDlMMs?

114. A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.

Which solution should you recommend to meet the customer requirements?

115. Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?

116. Which statement is true regarding configuring memory in an HPE ProLiant server?

117. you are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They need to accelerate application performance.

Which HPE ProLiant Gen10 feature set will address this customer’s needs?

118. A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.

Which management application can the customer use to discover errors quickly and minimize the possible downtime?

119. Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

120. A customer needs to support both network and storage traffic on their network, which includes Ethernet, iSCSi, and Fibre Channel devices. The customer is concerned about the large amount of cables coming from the various cards inserted in their rack servers, as well as the operational costs in their data center.

Which component addresses these issues?

121. A customer needs to share files among their Microsoft Windows servers cost-effectively and requires disaster support Which native StoreEasy features win address the customer's need? (select two)

recovery

122. When should you use the HPE Switch Selector?

123. A customer requires a recovery strategy that provides multiple rollback points during the day for their Microsoft SQL database. The customer needs to be able to recover data instantly.

Which method meets this requirement?

124. A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have expressed an interest in software-defined storage.

Which HPE compute platform should you suggest?

125. A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system.

Which HPE product family will meet the customer’s needs?

126. A fast-growing customer with a NAS-based storage solution is evaluating Fibre Channel storage for their VMware environment.

How would this customer benefit from adding 16 Gb Fibre Channel storage to their environment? (Choose two.)

127. When installing servers in a rack, a customer has left gaps between the servers.

What should you tell this customer regarding the space between servers? (Select two.)

128. You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.

Which components should you remove? (Choose two.)

129. A customer is enhancing their server and storage virtualization infrastructure. They need to maximize memory density per rack unit and provide an all-flash array to the environment.

Which HPE solutions should they install to fulfill these requirements (Select two.)

130. A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.

How should the customer configure their network?

131. A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server.

Which HPE tool can the admin use to gather this information?

132. In which layer of the OSI model would you find an IP address?

133. A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.

Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

134. Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)

135. You are creating an internal array on an HPE ProLiant server.

What can you do to maximize the storage space efficiency?

136. A customer wants to decrease problem resolution time on their HPE infrastructure.

Why would this customer benefit from Insight Remote Support?

137. A customer has a branch office that needs a local file server. The branch office does not have a server rack. For backup performance, the server must have two processors.

Which HPE server should the company install?

138. A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.

Which action should the customer take first?

139. You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.

Which HPE management solution meets the customer’s needs?

140. You are installing an HPE StoreOnce backup system in a customer’s environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.

How must you configure the StoreOnce system to meet the customer’s requirements?

141. A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center.

Which HPE resource should you use to provide this information?

142. You need to install 10 HPE ProLiant servers in an environment without DHCP.

Which tool can you use to set up remote management?

143. A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch.

Which feature should the customer implement at the switch level?

144. You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans constantly run at 100%.

Which action should you take first?

145. DRAG DROP

Match the HPE Tool with its use case. Select all that apply.

146. A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.

Which HPE solution meets this customer’s requirements?

147. A customer requires a software-defined storage solution.

Which storage solution meets the customer’s needs?

148. You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.

Which HPE ProLiant Gen10 feature set will address this customer’s needs?

149. DRAG DROP

Match the industry trend with its use case.

150. A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.

Which HPE server family meets the customer’s needs?

151. Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

152. You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.

Which tool should you use?

153. You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.

Which HPE tool enables you to select and configure a switch according to precise specifications?

154. Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

155. You are installing a HPE MSA storage system and need to connect the power cooling module (PCM).

What should you do to ensure power redundancy?

156. A customer requires a MSA storage system that they use for archiving data. The system needs to provide a large amount of storage.

Which drive type meets the customer’s needs?

157. You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.

How should you connect the switch to the network?

158. You are installing a combined server and storage solution at a customer location.

What must you keep in mind regarding the typical requirements for the location? (Choose two.)

159. DRAG DROP

Match the HPE Tool with its use case. Select all that apply.

160. DRAG DROP

Match the storage technology to the storage type.

161. You are installing new drives into the internal cage of a HPE ProLiant DL380 server.

How is the drive device number set?

162. Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and servers in an environment?

163. A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device.

Which technology should the customer configure on their existing switches?

164. A customer plans to use HPE ProLiant servers for an application that requires low latency for all components.

Which workload profile should the customer use?

165. A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.

Which HPE storage platform meets the customer’s needs?

166. A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.

Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

167. A customer needs to share files cost-effectively among their Microsoft Windows server over a local network.

Which storage solution meets this requirement?

168. Which network protocol is used to build a loop-free logical topology for Ethernet networks?

169. DRAG DROP

Refer to the exhibit.

Drag the correct protocols from the left to the appropriate area on the topology on the right.

170. A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.

Which command can be used in the CLI to perform this operation?

171. A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.

Which HPE management offering meets the customer’s needs?

172. A customer is planning to deploy a new Top of Rack solution.

They plan to use a stacking technology that meets the following requirements:

- Support for Multi Chassis Link Aggregation in an active-active mode.

- The control plane must not be a single point of failure.

- Rapid Fail-over. Unified Management.

- They require a maximum of two switches per stack.

Which stacking technology meets the customer’s requirements?

173. A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.

Which management solution provides this functionality?

174. What is a feature of the MSA 1050 that will help your Storage Customer better utilize storage resources?

175. Exhibit:





Which HPE ProLiant Server meets the customer's requirements?

176. An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.

Which command can the administrator use to collect support information from the switch?

177. A customer has the following requirements:

- two or more 10Gb SFP+ uplinks

- downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables.

- 24 downlink ports

Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

178. A customer needs NFS access on a fiber channel array.

What must be included in the solution to meet this requirement?

179. DRAG DROP

Match each HPE solution to its corresponding technology usage.

180. A client needs a data center network for a highly-virtualized server environment.

They have the following requirements

- 25 Gb connectivity from the servers to the top-of-rack switches

- support for iSCSl storage

- lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center

- support for Python script interpretation and open APIs

Which networking product line and architecture should you recommend?

181. What should you configure to limit the scope of broadcast domains in an Ethernet network?

182. Which component of HPE iLO provides continuous monitoring of more than 1600 parameters?

183. A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.

Which HPE tool should you recommend for performing this task?

184. A retail company recently implemented a Video surveillance solution. They now need an MSA storage solution with 100TB capacity. They want to be able to add more disk capacity if needed.

Which HPE tool can help you choose a storage solution, determine the total usable capacity, and create a BOM?

185. A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.

The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.

What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

186. A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.

Switch A has the lower LACP System Priority.

Which LACP operation states describe the failure above?

187. A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller

Which tool can display an Array Diagnostic Report?

188. What is used to identify a storage HBA port in a Fibre Channel SAN fabric?

189. DRAG DROP

A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.

Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

190. Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?

191. A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.





What should you recommend'?

192. What is a benefit of a NAS device?

193. A customer is purchasing a complete HPE solution that includes servers, storage, and networking. They need to leverage cloud storage for an off-site copy of their data in case of disaster.

Which HPE solutions should you suggest? (Choose two.)

194. DRAG DROP

Match the characteristic to the correct HPE ProLiant family.

195. DRAG DROP

Match each ProLiant solution to its ideal use case

196. DRAG DROP

Match each adapter to its characteristic.

197. A client complains about systems reliability issues caused by their staff’s inability to identify the root cause of failures. The client’s lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.

What should you configure in HPE OneView to enable the external monitoring of the managed devices?

198. DRAG DROP

Match each customer data center architecture to its network topology.

199. A customer is planning to deploy a branch office server rack.

The environment will have the following requirements:

- Single rack with 20 HPE ProLiant DL360 Gen10 Servers.

- Each Server will have 6 x 10G SFP+ Ports.

- Each Server will have a dedicated iLO port.

- The customer requires that only two switches be used.

- The customer requires separate control planes.

Which switch configuration can meet these requirements?

200. DRAG DROP

Match the Networking Product Family to the appropriate use case:

201. A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.

Which HPE Solution should you propose?

202. Which protocol can be used to access a shared directory on a network-attached storage device?

203. You are creating a configuration for a new Nimble HF40 array.

Which tool should you use to ensure that you include adequate cache in the configuration?

204. DRAG DROP

Indicate whether each management feature manages or monitors a single system or multiple systems.

205. Refer to the exhibit.





You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch interface?

A)





B)





C)





D)

206. A customer requests a quote for an HPE storage solution that meets these requirements

- fully redundant dual-controller storage array with no single points of failure

- 1 Gb or 10 Gb ISCSI connectivity

- at least four host-facing ISCSI ports

- capable of expanding usable capacity in small increments of one-to-two disks

Which HPE storage solution should be proposed?

207. DRAG DROP

You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration.

Drag the steps on the left Into their appropriate order in the answer area on the right.

208. HOTSPOT

You are configuring an MSA 2052 for one of your customers in OCA.

Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

209. What is a primary benefit of DAS?

210. DRAG DROP

A customer needs a new environment to support an ERP system.

The sizing information you received shows the following requirements:

- 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity

- 10TB of high performance shared storage

- Cloud-based performance monitoring and analytics

The customer prefers rack mounted equipment.

Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

211. HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.

Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?

212. You are validating a configuration prior to quoting it for the customer.

You plan to propose the following configuration:

- Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit

- HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit

- Two SN3000B FC Switches

Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

213. A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.

Which feature of this server will assist the customer with the initial Windows installation?

214. A customer Has a data center with third-party routers and firewalls You are designing a new data center network switch architecture consisting of FlexFabric switching for the data network and ArubaOS-Switch switching for the out-of-band management network.

The customer needs a network management platform with the capabilities to manage and monitor the entire environment

Which management platform meets the customer requirements?

215. Which solution should you recommend to a customer for basic file and print services?