GAQM CTIL Online Free Test

Posted by: Pdfprep Category: GAQM Online Questions Tags: CTIL Online Questions Post Date: January 5, 2021

CTIL exam prep questions are written by our professional IT teammates with a high level, which make sure the accuracy of CTIL actual questions. We have certified specialists and trainers who have a good knowledge of the CTIL actual test and the request of certificate, which guarantee the quality of the CTIL exam. We all have known clearly that the major issue of IT industry is lack of high-quality CTIL actual exam.

Page 1 of 1

1. Topic 5, Case Study# 5Scenario

A rail services provider is upgrading its signalling systems, to allow train drivers and signallers to communicate securely and timely. This is seen as a safety critical system. The IT processes in place include many quality check points, including the use of the V-model for software development.

The provider has recently lost many of its software development and test staff to other organizations. The management staff has been retained, including the project and development manager for this upgrade. A recruitment drive is underway.

You have been brought in as a new test manager, and you have been asked to review the processes surrounding development and testing.

The project manager has been asked about a formal process of building test procedures using specification-based techniques.

At what point in the test process should you first consider the test environment required for the project?

When writing the test policy.

When writing the test strategy.

With designing the test cases.

When writing the test procedures.

2. Which two of the following measures would give the best indication of likely product quality?

a) Number of hours of overtime worked.

b) Number of test runs.

c) Coverage of requirements achieved.

d) Defect trends.

e) Budget sent so far.

a and c.

b and d.

c and d.

d and e.

3. Which of the following best describes the order in which this should be carried out?

a) Decide which category of test design technique to use.

b) Review test specifications.

c) Write test procedures.

d) Create test cases.

e) Identify test conditions.

a, b, d, e then c.

b, e, a, d then c.

b, a, d, c then e.

e, b, a, d then c.

4. Which of the following provides the best example of a product risk leading to a project risk?

The signalling systems may have more defects than anticipated, leading to the need for more retesting to be carried out.

There may be unexpected lags on the network traffic communication, causing drivers to slow the trains down unnecessarily.

The new development staff may require training for this type of system, which, if not carried out, may lead to an increase in the number of defects introduced.

The budget may need to be increased significantly during the project, otherwise there may be delays in the delivery of the system.

5. Which of the following best describes the difference between the use of walkthroughs and inspections in this scenario?

Walkthroughs of specifications would enable the individuals to learn more about the system being developed, whilst inspections would allow the organization as a whole to improve.

Walkthroughs of signalling rules will be more cost effective than inspections.

Inspections of code should be carried out by the developers, whilst code walkthroughs should include just the testers.

A walkthrough is an example of a static testing technique, whilst an inspection is an example of a dynamic testing technique.

6. If the concentration of carbon dioxide in the air rises too high, the air may become toxic. To address these risks, the requirement specification for this system includes the following requirements:

R1) Oxygen must be replaced as it is consumed.

R2) Carbon dioxide must be removed from the air.

These requirements must be reflected in the functional, technical and program specification documents.

You are a newly recruited test manager.

A risk register has been produced with the following additional risks identified.

Which of the following would be an entry criterion into site acceptance testing for the air quality monitoring system?

That the code written to fulfil the requirement to monitor carbon dioxide levels has been 100% path tested.

That the functional specification accurately reflects requirements R1 and R2.

That the system has been tested at levels of oxygen usage well beyond anticipated personnel levels.

That the requirements for temperature control have been signed-off.

7. Which one is a product risk associated with the air quality management system?

The system required to monitor oxygen levels may be more expensive than those required to monitor air temperatures.

SubsInc may need to recruit extra developers and testers to deliver the project on time.

Oxygen levels may reach dangerously low levels.

Extreme temperatures may lead to heat exhaustion of personnel.

8. Which of the following is an accurate depiction of the hierarchy of test management documentation (where the highest comes first)?

Test policy-Test strategy-Project test plan-System test plan

Test strategy-Test policy-Project test plan-System test plan

Test policy-Project test plan-Test strategy-System test plan

Project test plan-Test strategy-System test plan-Test policy

9. When creating the functional specification for the temperature control system, which of the following review types would be most recommended to resolve any issues?

A walkthrough.

A technical review.

A management review.

A code inspection.

10. Which of the following test design techniques would be most suitable for testing that the oxygen is released at the required times?

Decision Testing.

Statement Testing.

Data flow Testing.

Boundary Value Analysis.

GAQM CTIL Online Free Test

Author