Cisco CCNP Collaboration 300-825 CLCNF Exam Free Dumps

Pdfprep2021-04-07T07:31:31+00:00

Implementing Cisco Collaboration Conferencing 300-825 CLCNF exam is a related test for Cisco CCNP Collaboration certification, which tests your knowledge of conferencing architecture, installation and configuration, integration, and troubleshooting. Use the latest Cisco CCNP Collaboration 300-825 CLCNF exam dumps questions to clear the test easily.

Cisco 300-825 CLCNF exam topics cover the following sections: Conferencing Architecture, Installation and Configuration, Integration and Troubleshoot. Study the updated Cisco CCNP Collaboration 300-825 CLCNF exam free dumps to test all the details.

Page 1 of 3

1. An administrator configures a Call Bridge to record meetings .

Which two configuration elements tell the Call Bridge where to find the recording server? (Choose two.)

tenants

IVR

DTMF combination

sipRecorderUri

outbound rules

2. How should an administrator configure Cisco Meeting Server to limit the number of participants of all conferences to 10?

Set participantLimit to 10 in callProfile and apply the callProfile to the system.

Set participantLimit to 10 in callProfile and apply the callLegProfile to the coSpace.

Set participantLimit to 10 in callLegProfile and apply the callLegProfile to the system.

Set participantLimit to 10 in callProfile and apply the callProfile to the coSpace.

3. What is the maximum number of full HD external web app calls that is supported per large OVA Expressway?

800

600

150

200

4. An engineer configures Cisco Meeting Server as a conference resource for Cisco UCM. Cisco UCM has a secure SIP trunk to Cisco Meeting Server, but the server does not register to Cisco UCM .

Which configuration resolves this issue?

Ensure that the SIP trunk from Cisco UCM to Cisco Meeting Server is a secure trunk using port 5061.

Add Cisco Meeting Server to the Cisco UCM SIP trunk with an IP address and not an FQD

Set the Web Admin port on the Conference Bridge settings to match Cisco Meeting Server.

Configure an MRGL that contains Cisco Meeting Server to be associated with device pools.

5. Refer to the Following:

Content-Type: application/sdp

Content-Length: 4938

v=0

o=Acano 0 0 IN IP4 10.0.101.120

s=-

c=IN IP4 10.0.101.120

b=CT:16

t=0 0

m=audio 50262 RTP/AVP 108 107 109 110 9 99 111 100 104 103 0 8 15 102 18 13 118 101

a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48

a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48

a=crypto:3 AES_CM_128_HMAC_SHA1_80 *******************************************************|2^48

a=crypto:4 AES_CM_128_HMAC_SHA1_32 *******************************************************|2^48

<details omitted>

m=video 50264 RTP/AVP 97 116 114 96 34 31 100 121 b=TIAS:16000

a=crypto:1 AEAD_AES_128_GCM ************************************************|2^48

a=crypto:2 AEAD_AES_256_GCM ********************************************************************|2^48

a=crypto:3 AES_CM_128_HMAC_sha1_80 *******************************************************|2^48

a=crypto:4 AES_CM_128_HMAC_sha1_32*******************************************************|2^48

a=content:main

a=sendrecv

a=sprop-source:1 count=2;policies=cs:1

a=sprop-simul:1 1 *

a=rtcp-fb:* nack pli

a=rtcp-fb:* ccm fir

a=rtcp-fb:* ccm cisco-scr

a=extmap:1 http://protocols.cisco.com/virtualid

a=extmap:2 http://protocols.cisco.com/framemarking

a=rtpmap:97 H264/90000

a=fmtp:97 profile-level-id=42800a;max-mpbs=489600;max-fs=8160;max-cpb=4000;max-dpd=4752;max-fps=6000

Users report that they do not see a high-quality picture on the high-definition endpoints when they call into Cisco Meeting Server. An engineer must extract the SDP that is offered by Cisco Meeting Server from the SIP traces to troubleshoot .

What is the cause of this issue?

Cisco Meeting Server is not configured for

265 to support high-definition video calling.

The AES ciphers are not compatible with high-definition video calling.

The Content-Length value in the SDP does not support high-definition video calling.

The SIP call bandwidth is not at a value that supports high-definition video calling.

6. A Cisco Meeting Server cluster is deployed across three data centers. One is headquarters, and two are branch offices .

Which database deployment is ideal for geo-redundancy in multiple locations?

three database nodes in the headquarters data center

two database nodes in the headquarters data center and one database node in each branch data center

two database nodes in each branch data center

one database node in each data center

7. DRAG DROP

Drag and drop the options from the left into the order on the right to make the call flow connect an endpoint that is registered to Cisco UCM to a Cisco Meeting Server meeting. Not all options are used.

8. Refer to the exhibit.

An administrator receives this log entry from a web user. In which two ways should the administrator gather diagnostic information? (Choose two.)

Generate a call diagnostics file from logbundle.tar.gz using SFT

Download the diagnostics file from the computer of the web app user.

Generate a call diagnostics file from the MM

Use an API to download the diagnostics file.

Download the diagnostics file from the Web Admin.

9. An administrator has video devices and an Expressway infrastructure with the SIP domain of cisco.com. A cluster of Cisco Meeting Servers is added to the network for conferencing purposes to utilize a SIP domain of spaces.cisco.com, and calls must be routed from the endpoints to meetings on the server .

What should be configured to accomplish this goal?

outbound call rule on Cisco Meeting Server that matches @spaces.cisco.com and targets spaces

incoming call rule in Cisco Meeting Server that matches @cisco.com and targets the SIP trunk to Expressway-C

search rule on Expressway-C that sends calls for @spaces.cisco.com to the Cisco Meeting Server neighbor zone

search rule on Expressway-E that sends calls for @cisco.com to the DNS zone

10. What is a benefit of using a cloud-based collaboration solution?

additional capital expenditure to budget

reduced administrative overhead to maintain

reduced operational expenditure to scale

granular meeting management for operators

Page 2 of 3

11. An engineer configures Cisco Meeting Server with Expressway for external web app access and must enable participants to use the web app to join conferences that are hosted on the meeting server .

Which service should be used in the Expressway-E accomplish this goal?

Cisco Meeting Server

SIP

XMPP server

TURN

12. Which Expressway-E service or protocol is required for external web app participants to join a Cisco Meeting Server version 3.0 conference as guests?

XMPP

TURN

SIP

323

13. When should self-signed certificates be generated from the MMP of Cisco Meeting Server?

when testing Cisco Meeting Server configurations

when Cisco Meeting Server is integrated with a Skype for Business Front End Pool

when Call Bridges reside within the internal network

when a Cisco Meeting Server is added as a Conference Bridge to Cisco UCM

14. Which two protocols should be used to back up Cisco Meeting Server? (Choose two.)

SIP

SFTP

HTTPS

HTTP

SSH

15. What is the purpose of the Call Bridge service within Cisco Meeting Server?

It connects users from their web browsers into meetings that are hosted on Cisco Meeting Server.

It replicates database information between all nodes in the cluster.

It converts RTP media into MP4 files that can be distributed for replay.

It is the core conferencing service and manages media and signaling.

16. An engineer must configure Cisco Meeting Server integration to Cisco UCM .

Which DNS A record must be configured to accomplish this goal?

Call Bridge

SRV

Conference Name

Cisco UCM Subscriber

17. A company that uses Cisco Meeting Management wants to be able to look up contracts when it adds participants to a meeting and to view scheduled meetings before they start .

Which two pieces of information are necessary for the integration that accomplishes this goal? (Choose two.)

Cisco Meeting Server MAC address

extra Cisco TMS license

Cisco TMS login credentials

primary Call Bridge certificate

Cisco TMS FQDN or IP address

18. What is the default maximum resolution for the internal streamer?

720p

1440p

1080p

480p

19. A corporation must configure Cisco TelePresence Management Suite Extension for Microsoft Exchange for users to schedule meetings with Outlook.

What must be configured to accomplish this goal?

Cisco UCM endpoints

a client certificate and password to interact with Active Directory

Room mailboxes dedicated for the use of TelePresence scheduling

Cisco TMS provisioning extension

20. An administrator sets up conference resources by using a clustered Cisco Meeting Server deployment for video endpoints that are registered to Expressway. The administrator must ensure that no single server gets overloaded within the cluster .

What should be configured to accomplish this goal?

a record with the cluster FQDN of the Cisco Meeting Server in the external DNS servers.

Expressway-C as the traversal client to Expressway-

Cisco Meeting Server and Expressway-C in the same domain.

a separate zone for Cisco Meeting Server servers in the cluster.

Page 3 of 3

21. Refer to the exhibit.

What does this notification indicate about activity over the last 90 days?

In cluster 2, more licenses have been used than are installed for less than 15 days.

In cluster 3, the license agreement will remain in compliance for 20 more days.

In cluster 4, at least 5 percent of the installed licenses have not been used.

In cluster 6, the license agreement has been out of compliance for more 30 days.

22. Refer to the exhibit.

<?xml version=”1.0”?>

<coSpace id=”2cc9110e-a36a-4173-8cb5-660c3d1e7c92”>

<name>CCNP Collaboration</name>

<autoGenerated>false</autoGenerated>

<uri>8001</uri>

<callId>849274932</callId>

<passcode>1234</passcode>

<secret>XnKexB0yWQ2iwfuoCe6AWQ</secret>

<numAccessMethods>2</numAccessMethods>

</coSpace>

When a user dials 8001 to connect to a space that is hosted on Cisco Meeting Server, the user is prompted for a pin. The prompt says the user should press # to connect to a meeting without a pin, but guests and hosts must enter a pin before connecting to the meeting.

Which configuration change resolves this issue?

The secret value must be changed to be solely numeric instead of alpha-numeric.

The passcode must be changed to be longer than four digits.

All access methods that are associated with the space must be changed to include a pin.

A callLegProfile must be created and associated with the space so that pins are not optional.

23. An administrator wants to automatically schedule conferences with a cluster of Cisco Meeting Server devices that are managed with Cisco TMS.

How should Cisco TMS be configured to accomplish this goal?

After the Cisco Meeting Server cluster is added, the Cisco TMS should failover an active conference to a different Cisco Meeting Server.

After the first Cisco Meeting Server is added, all servers in the cluster should automatically be detected.

When the first Cisco Meeting Server is added, the system name should automatically be detected.

After the Cisco Meeting Server cluster is added, the primary Cisco Meeting Server should automatically failover to another cluster member.

24. To which two places should an administrator go to view an upcoming meeting scheduled on Cisco Meeting Server? (Choose two.)

Cisco Meeting Server MMP interface

Cisco Meeting Management meetings interface

Cisco Meeting Server web user interface

Cisco Meeting Server API

Cisco TMS interface

Cisco CCNP Collaboration 300-825 CLCNF Exam Free Dumps

Author