Your network contains three Network Policy Server (NPS) servers named NPS1, NPS2, and NPS3. NP51 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1. You need to ensure that NPS2 receives connection requests. NPS3 must only receive connection requests if NPS2 is unavailable.
How should you configure Group1?
A . Change the Priority of NPS3 to 10.
B . Change the Weight of NPS2 to 10.
C . Change the Weight of NPS3 to 10.
D . Change the Priority of NPS2 to 10.
Answer: A
Explanation:
Priority. Priority specifies the order of importance of the RADIUS server to the NPS proxy server. Priority level must be assigned a value that is an integer, such as 1, 2, or 3. The lower the number, the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is assigned the highest priority of 1, the NPS proxy sends connection requests to the RADIUS server first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and then use the Weight setting to load balance between them.
Leave a Reply