2021 NS0-183 NetApp Certified Storage Installation Engineer, ONTAP Dumps

Pdfprep2021-03-09T08:54:07+00:00

NetApp Certified Storage Installation Engineer, ONTAP NS0-183 dumps can make sure you pass the test easily. Our certified experts collect all the related Netapp NS0-183 exam dumps questions that are testing in the real test. Please note: to take Netapp NS0-183 exam, you should have at least 6 to 12 months of experience with NetApp ONTAP solutions, including setting up, configuring, installing, testing, and troubleshooting NetApp storage systems.

The NCSIE ONTAP NS0-183 exam includes the following topics: Basic Installation Topics and Tools, ONTAP Concepts, ONTAP Networking, ONTAP Switches, ONTAP Configuration and Customer Handoff. Study the following NCSIE ONTAP NS0-183 exam dumps questions to test all the related topics.

Page 1 of 3

1. Which two SVMs are automatically created during the cluster setup? (Choose two.)

admin SVM

system SVM

node SVM

data SVM

2. Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.

Which two tools would you use to validate the configuration? (Choose two.)

Active IQ Config Advisor

Interoperability Matrix Tool

Active IQ System Manager

Hardware Universe

3. One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.

Which two methods would you use to connect to the node failing to come back online? (Choose two.)

Use the Intelligent Platform Management Interface.

Use the Service Processor Interface.

Use Secure Shell.

Use Telnet.

4. You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.

Which two conditions must be fulfilled before you start the migration? (Choose two.)

All cluster LIFs must be in the up state and on their home ports.

The “Enabled Switchless Cluster” option must be manually set to “false”.

All cluster LIFs must have an MTU size of 1500.

The 2-node switchless configuration must be properly set up and functioning.

5. Click the Exhibit button.

You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.

Referring to the exhibit, to which port should the redundant management network be cabled?

6. Click the Exhibit button.

You are setting up a new AFF A700 into a new rack at a customer’s site. The customer asks you to plan for simplified future growth.

Referring to the exhibit, how would you satisfy this requirement?

Option 4

Option 2

Option 3

Option 1

7. In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?

8. Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.

In this scenario, which two statements are correct? (Choose two.)

Configure an SNMP community string on the cluster.

Configure DNS on the cluster.

Configure a trap host on the cluster.

Configure a firewall policy and allow SNM

9. You are installing a new ONTAP 9.7 cluster by following the installation and setup poster. You are ready to complete the initial cluster setup. You have connected your laptop to the management switch. However, when browsing the network, you are unable to discover the ONTAP controllers.

Which statement explains this behavior?

You do not have network discovery enabled.

You do not have a static IP address.

You do not have IPv6 configuration set.

You do not have a default gateway set.

10. You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.

Which documentation output would you present to the customer to satisfy this requirement?

Active IQ Unified Manager output

NetAppDocs output

Config Advisor output

Active IQ OneCollect output

Page 2 of 3

11. You installed a new pair of Cisco 92300YC cluster switches at a customer’s site. Before you install any files on the switch, you want to view the current configuration.

In this scenario, which command would you use to accomplish this task?

switchcfgshow

fabricshow

config show

show running-config

12. You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.

In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)

term-based

perpetual

base

master

13. An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.

In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer’s requirement? (Choose two.)

Ensure that Active IQ Config Advisor is installed.

Ensure that the onsite engineers receive EMS alerts when hardware issues occur.

Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.

Educate the onsite engineer about how to manually log support calls.

14. You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.

In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?

BGP

broadcast domains

routing

IPspaces

15. You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.

Which action must be performed to ensure that the customer’s requests are satisfied?

Perform a takeover of Node 2 to ensure that it does not run.

Assign all data LIFs to Node 1.

Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.

Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.

16. You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.

In this scenario, which cluster configuration is allowed with ASA controllers?

Add the ASA controllers to an existing 4-node cluster with NAS licenses.

ASA controllers can only be added to clusters that have existing SAN licenses.

ASA controllers can only be installed as a standalone HA pair.

Add the ASA controllers to an existing 10-node cluster.

17. What is the default shelf ID for disk shelves with IOM12 modules?

18. You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.

In this scenario.

Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)

network port show -ipspace Cluster

network interface show -vserver Cluster

network device-discovery show -protocol cdp

network interface show -vserver Cluster -fields auto-revert

19. Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.

In this scenario, which three resources would you use to find this information? (Choose three.)

Hardware Universe (HWU)

Interoperability Matrix Tool (IMT)

hardware installation setup poster

AFF FAS Documentation Center

Active IQ Unified Manager

20. You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.

How do you verify your configuration?

Use the storage show disk -p command.

Use the storage disk option show command.

Use the disk show -fields initiator command.

Use the sysconfig command.

Page 3 of 3

21. You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.

In this scenario, what are two methods to update ONTAP? (Choose two.)

Use the cluster image package get and cluster image update commands.

Use a USB drive with the new software image and let ONTAP automatically boot.

Use ONTAP System Manager to download and install the new software image.

Use ONTAP System Manager to upload and install the new software image.

22. You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.

In this scenario, which method provides access to the logs from a Web browser?

ACP

ADP

DNS

SPI

23. You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.

In this scenario, which statement is correct when implementing FlexCache?

A capacity license is required.

A subscription license is required.

A site license is required.

No license is required.

24. When you install a new ONTAP 9.7 4-node cluster, which network type is required?

data network

peering network

cluster interconnect

intercluster network

2021 NS0-183 NetApp Certified Storage Installation Engineer, ONTAP Dumps

Author